EVT Industries Sdn Bhd is an M12 and M16 Grade 8.8 threaded rod supplier in Malaysia with in-house production in Nilai, Negeri Sembilan. We support contractors, data centre projects and hardware businesses with controlled thread production, custom cutting, plain or zinc-coated finishes, and order planning based on the required dimensions and quantity.
If you are preparing a bill of quantities, tender, maintenance order or recurring supply schedule, the quickest route to a useful quotation is to identify the exact M12 and M16 specifications required. This page explains what to provide, how we manufacture the rods and how to compare supplier quotations without relying on price alone.
Confirm the grade, diameter, thread requirement, finished length, surface finish, quantity and application before placing an order. M12 and M16 describe nominal diameters, but diameter alone is not enough to establish whether a rod matches your drawing, connection or load design.
Our team can review your dimensional requirements, technical drawing or order list and align production with the requested specification. EVT Industries states a manufacturing range of M6–M36 and 1–3 metre lengths, supported by custom specifications and flexible production volumes.
| Quotation detail | What to provide | Why it matters |
|---|---|---|
| Diameter and grade | State M12 or M16 and Grade 8.8 clearly for each line item. | Prevents a lower grade or different diameter from being quoted as an apparent alternative. |
| Length | Provide the full rod length or required cut length in millimetres or metres. | Determines material usage, packing, handling and whether additional site cutting is needed. |
| Surface finish | Choose plain or zinc-coated, subject to the specified installation environment. | The finish affects surface protection and suitability for the intended conditions. |
| Quantity and schedule | List pieces per size, delivery location and required delivery sequence. | Allows production and logistics to be planned around your actual order volume. |
| Project information | Attach the relevant drawing, bill of quantities or consultant specification where available. | Helps our team identify inconsistencies before production rather than during installation. |
In-house production gives us direct control over thread formation, cutting and the selected surface-finishing stage. This is particularly useful when an order combines M12 and M16 rods, multiple lengths or repeat quantities that must follow the same purchasing specification.
Our manufacturing approach covers high-accuracy thread rolling and precision threading, controlled cutting, custom-length preparation, and plain or zinc-coated finishes. The practical result is a coordinated workflow from the stated requirement to the finished threaded rod.
For more detail on the core process, view our thread rolling and precision threading service. If the rods must arrive ready for a particular installation length, our cutting and custom length production service explains the available support.
Share your required grade, rod lengths, finish, quantities, delivery location and drawing or bill of quantities. We will review the information so you can request a quotation based on a defined supply scope rather than an incomplete unit-price comparison.
WhatsApp Our Team Submit an Enquiry Call EVT IndustriesA transparent quotation starts with a like-for-like specification and identifies the variables affecting the supply price. Two offers for an M12 or M16 rod may not be comparable if they use different grades, lengths, finishes, quantities or delivery terms.
EVT Industries prepares supply discussions around the confirmed product requirement. Because we manufacture in-house, the quotation can be based on the requested diameter, Grade 8.8 requirement, length preparation, finish, volume and logistics rather than a generic product description.
The main commercial factors are:
We do not present an unsupported universal price because the final amount depends on these order details. To compare offers fairly, check the quoted grade, dimensions, finish, quantity basis and delivery scope before focusing on the total price.
Select the finish according to the installation environment and specify custom cutting when fixed lengths will simplify site work. Plain rods are intended for applications where additional surface protection is not required, while zinc coating provides enhanced corrosion resistance.
EVT Industries offers plain and zinc-coated threaded rod finishes as well as custom-length preparation. The appropriate combination should follow the project drawing, consultant requirement and operating environment rather than a one-size-fits-all recommendation.
| Option | Appropriate purchasing situation | Point to confirm |
|---|---|---|
| Plain finish | Controlled conditions or applications that do not call for an additional protective coating. | Confirm that the project specification permits an untreated finish. |
| Zinc-coated finish | Applications requiring improved surface durability and corrosion resistance. | State the required finish clearly instead of using the general term “galvanised” without a defined specification. |
| Custom-cut lengths | Projects with repeated installation dimensions or limited time for on-site cutting. | Provide exact dimensions and permitted tolerances from the drawing. |
| Longer standard lengths | Sites that prefer to cut rods according to changing field conditions. | Account for labour, offcuts, storage and handling when comparing the apparent material price. |
Our surface finishing and protection service provides further information about the plain and zinc-coated choices available from EVT Industries.
At EVT Industries Sdn Bhd, we manufacture threaded rods and provide precision-threading solutions from Nilai, Negeri Sembilan. We serve contractors, data centre requirements, hardware businesses and other construction or industrial customers in Malaysia and overseas.
You can also explore our broader threaded rod manufacturing services or learn more about EVT Industries.
Our supplier offer is supported by defined production capabilities rather than a general trading claim. We publish the diameter and length ranges we handle, describe our thread-rolling and cutting processes, and provide direct access to our team for specification review.
EVT Industries Sdn Bhd is located at Jaya, 2, 1/1A, Lengkok Emas, Kawasan Perindustrian Nilai, 71800 Nilai, Negeri Sembilan, Malaysia. Company registration: 202601004060 (1666157-T).
Send us your M12 and M16 order list for review. Include the required lengths, finish, quantities, delivery destination and relevant drawing so our team can respond based on the correct manufacturing and supply scope.
WhatsApp Our Team Send Your Specifications Call EVT Industries